Matrix design
Control sound in all dimensions
The HOLOPLOT Matrix Array enables a new level of sound control.
The matrix arrangement of loudspeaker drivers of different sizes – in a unique multi-layered configuration – enables control over sound propagation across a large frequency range, while providing the SPL and quality desired for high-performance sound reproduction.
The Modul 96 (MD96) is a two-way Audio Module integrating 96 drivers in a two-layered matrix design. The Modul 80-S (MD80-S) is a three-way Audio Module with 80 drivers in its first two matrix layers and a sensor-controlled subwoofer driver in its third layer.
Individual amplification channels for each driver are integrated into the X1 Audio Modules, eliminating the need to provide separate amplification racks.
Modul 96
Modul 80-S
X1 Rigging System
Simple, flexible deployment
The X1 rigging system is designed to locate and secure the HOLOPLOT X1 Audio Modules MD96 and MD80-S in permanent and temporary installations. The system consists of a number of structural components which have been designed for the flexible, easy, and safe deployment of a HOLOPLOT Matrix Array.
X1 Liftbars (left & right) connect the X1 Liftbar at the top of each column to the X1 Sideplates on the top Audio Module. There are no moving or loose parts on the X1 Liftbars. Mounting holes are available to influence the array tilt angle. Notches at the top of the bars index hole positions. Construction is welded steel fastened with screws.
The X1 Liftbar transfers the load of the entire X1 array to a rigging point. One X1 Liftbar is required at the top of each column. Two captive quick release pins (QRP) are available for attachment to the X1 Liftbars. There are 3 x 21 mm holes in the top of the X1 Liftbar locations to accommodate 3.75T shackles. Construction is welded steel.
X1 Sideplates (left & right) are affixed to the left and right MD96 or MD80-S Audio Modules. Assembled from steel sheets and screwed together around locking components. There are different X1 Sideplate parts for the left and right sides of the Audio Module. The MD96 and MD80-S both use the same X1 Sideplate assemblies. X1 Sideplates are hung from other X1 Sideplates, or X1 Liftbars using an internal locking bar that is opened and secured with front-accessible levers.
X1 Modul 96
Two-way Audio Module
Configuration: Two-layer Matrix Arrangement
LF layer
18x 5-inch cone driver in individual dual-ported chambers
HF layer
78x 1.3-inch soft dome tweeter with integrated waveguides
Maximum SPL (one unit, optimized parallel beam configuration*)
LF layer
LF layer
152 dB**
X1 Modul 80-S
Three-way Audio Module
Configuration: Three-layer Matrix Arrangement
Maximum SPL (one unit, optimized parallel beam configuration*)
LF layer
HF layer
152 dB**
HOLOPLOT X2 Matrix Array
It's all about control
Freedom has never sounded so controlled. Place sound precisely where you need it and precisely where you don’t. Create sound fields that optimally cover audience areas of any shape and size, with exceptionally authentic sound localization, lifelike distance, and directional perception of audio sources.
HOLOPLOT Matrix Arrays utilize a powerful combination of 3D Audio-Beamforming and Wave Field Synthesis, for the precise shaping and steering of beams in two dimensions – transforming the way we can use and experience sound.
X2 Modul 30
Technical Data
Configuration: Single-layer matrix arrangement
Maximum SPL (one unit, optimized parallel beam configuration*)
Max. SPL capabilities are dependent on beam configuration (incl. the cut-off frequency) as well as array size, and should be assessed using HOLOPLOT Plan. Peak level referred back to 1 m under free field conditions using bandpass filtered pink noise signal with a 12 dB crest factor according to IEC 60268 and an optimized parallel beam configuration
Standard
(max. SPL: 130 dB)
140 – 18,000 Hz (-3 dB)
110 – 20,000 Hz (-10 dB)
Low-frequency extension mode
(max. SPL: 125 dB)
100 – 18,000 Hz (-3 dB)
80 – 20,000 Hz (-10 dB)
Beamforming Capabilities: HOLOPLOT 3D Audio-Beamforming and Wave Field Synthesis
Up to 12 beams in parallel per X2 Matrix Array, each beam with its own audio input channel, equalization, level, shape, and position:
8 fully user-configurable parametric beams and virtual sources
4 beams providing optimized coverage over a predefined audience area
Steering angle and opening angle user adjustable (0.1° steps) / defined by HOLOPLOT Algorithm for optimized coverage
Steering angle and opening angle user adjustable (0.1° steps) / defined by HOLOPLOT Algorithm for optimized coverage
Amplification
Processing
Power Consumption
18w
Connectivity
Physical Characteristics
Standard: Black (RAL 9005) or White (RAL 9003)
Optional: Custom colors (RAL classics, NCS, and Pantone)